Specialised oils, lubricants and greases for agricultural machinery

Specialised oils, lubricants and greases for agricultural machinery

Introduction

Specialized oils, lubricants and greases for agricultural machinery, are very crucial to the agriculture industry, they are to prevent contamination, protect the machinery against oxidation, corrosion, and rust, as well as provide longer oil drain intervals, which results in reduced oil consumption. Our Specialized oils, lubricants and greases for agricultural machinery. forms a film between the metal surfaces of machine parts to avoid metal-to-metal contact and to keep the machine running efficiently. When it comes to Specialized oils, lubricants and greases for agricultural machinery original equipment manufacturers (OEMs) producing equipment specifically for the agricultural industry and workshop facilities on farms, Epoxy has a range of innovative lubricants to ensure maximum operational reliability from engines to transmissions and hydraulics.

Benefits of Specialized oils, lubricants and greases for agricultural machinery

“The agricultural market is massive. One Specialized oils, lubricants and greases for agricultural machinery tends to not appreciate its size because it is seasonal. You can drive past a farm and think nothing is happening, but that is simply because it is not the planting or harvesting period. Due to its seasonality, the agricultural industry requires specialized oils and lubricants. Epoxy has therefore formulated products that can withstand the rigors of equipment operating for three months and then standing idle for six. These include engine oils, multifunctional hydraulic and transmission oils, greases and specialized coolants.

Specialized oils, lubricants and greases for agricultural machinery whereas a vehicle such as an on-highway truck encounters up- and downhills that moderate the engine output, common agricultural machines like tractors deliver maximum output all the time. “If it is working, it is moving, and normally it is pulling five times its weight as well. This where the AGRIFARM range from Epoxy comes into play. Agricultural machinery is required to deliver top performance daily, so the correct oil is critical to maintain performance and durability. “Tangible benefits of using our lubricants include increased oil change intervals and significantly less wear on components. The range of specialty agricultural lubricants includes all Epoxy products, both developed for use in transmission and hydraulic systems. They can be deployed in brakes designed to run in an oil bath, commonly known as wet brakes. Epoxy products can be used in an engine if the respective OEM specifications are adhered to. When it comes to lubricating greases for agricultural machinery, RENOLIT combines technical excellence and cost-effectiveness in the largest number of applications. Specialized oils, lubricants and greases for agricultural machinery have been proven highly successful under the most arduous conditions in the agricultural industry for maximum reliability of farmers’ vehicle fleets. Our Epoxy high-quality products meet the latest OEM standards in terms of application safety since we only use selected base oils and specially developed additives.

Physical and chemical Properties of Specialized oils, lubricants and greases for agricultural machinery

The different properties of the lubricating oil includes
1. Viscosity: The is a lubricant ‘s property under which it resists flux. The oil should be sufficiently viscous to
hold a layer of fluid between the two matting surfaces. The viscosity is measured using an instrument called the
viscometer and expressed in terms of the amount of viscosity. This is inversely proportional to temperature, i.e.
since the temperature decreases the viscosity, and vice versa.
2. Flashpoint and Fire point: Flashpoint is the lowest temperature at which oil is to be heated until sufficient
inflammable vapor come off which produces a momentary flash when brought to the flame. So, when the
vapors are released continuously and the flame persists for a longer period, then that temperature is called
fire point. A good lubricant has its flash and fire point above the temperature at which engine work, so that fire
hazards are reduced.
3. Cloud point and Pour point: When lubricating oil is cooled, the temperature at which wax and other
substance in the oil crystallize and separate from oil is called cloud point. The lowest point temperature at which
the oil ceases to flow when cooled is called cloud point. These points indicate the suitability of lubricant for use
in cold conditions. A good lubricant required to give service at low temperature should possess low pour point
and cloud point.
4. Oiliness and wettability: The ability of the lubricating oil to adhere to the surface is known as oiliness which
depends upon on its wettability and surface tension. A good lubricant should have oiliness enough to adhere to
the surface even at very high pressure.
5. Vitality: The volatility of a lubricant is the property that defines its evaporative loss characteristics. A good
lubricant should have low vitality at working temperature.
6. Carbon residues: Lubricating oil has a higher percentage of carbon in the combined form. A good lubricant
should not deposit carbon when used at high temperature

Conclusion

 

Internal combustion engines are composed of various types of moving parts. One can observe a constant
wearing of moving pieces because of the continuous and rigorous movement of various metallic surfaces over
one another. Lubrication helps to smooth the process and thus reduce wear and tear on the parts of the
machinery. So, a component can break down due to excessive heat and destructive damage, without proper
lubrication. Therefor lubrication ,oil and grease is necessary and highly recommended to prevent all those harmful effects and for durability of agricultural machineries.

 

Read Previous

Isreali Drones to fly medical supplies to major hospitals

Read Next

First Steps to Sustainable Ecommerce in 2023

Leave a Reply

Your email address will not be published. Required fields are marked *